ATTENTION
BEFORE
YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPIC BELOW, PLEASE READ
THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU
CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000
ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE
BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953, 08168759420
WHATSAPP
US ON 08137701720
CONSTRUCTION OF MOTORIZED MIXER
ABSTRACT
The fabrication of the pilot motorized mixer in volved a
preliminary computation of the durunsions of the galvanized steel used,
marketing out cutting out to sizes folding, welding, assembling and painting.
The dimensions of the motorized mixer are as follows: The
vessel is of 300min in diameter and 450mm in height, the conical edge of the
cover is of 300mm in diameter which is formed by are welding operation.
Th vertical shaft (spindle) is of 450 mm in length and 300mm
in diameter the impeller blade is 80mm in diameter 150mm in length which is
marketed of the galvanized steel of 2mm thickness.
An electric motor of about 1 hp is mounted vertically in the
mixer barrel. The blades are carried and
positioned at the extreme for the turning operation.
The constructional material used is locally source and is
selected to suit the desired purposes such as galvanized steel which resists
rusting the constructed pilot motorized mixer was tested and functioned
effectively which can be compared with other important mixer in our market on
terms of efficiency and cost and which has application in processing and
applied industries.
TABLE OF CONTENTS
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
CONSTRUCTION PATTERN (PROCEDURE) -
ECONOMIC ANALYSIS
CHAPTER FOUR
CONCLUSION AND RECOMMENDATION
REFERENCE
CHAPTER ONE
INTRODUCTION
The aim and objective of this project work is to carry out
construction of a pilot motorized mixer for small scale production that will be
suitable for detergent production, paint production, soap production e.t.c.
Pilot mixer refers to as a mixer that is small compare to
industrial mixer. The mixer installed
with an electric motor can be operated automatically this the name motorized
mixer. The major components of the
equipment are the vessel / casting the shaft, the impeller, baffle and the
electric motor resting on it’s plat form.
In Engineering, the design of pilot motorized mixer machine
has to do with consideration of the relative costs of the selected materials.
The material selected would be of good output the choice of
material or selection of materials has been of high consideration. Engineering material like metals, non metals,
plastics are used in the design of mixers and has to do with the expectation of
the designer and production crew.
Hence Engineering practice of fabrication with emphasis on
material and cost has been the center focus of modern technology and the design
of the motorized mixer.
For the purposes of this project construction emphasis on
reliability, functionality and efficiency of the mixer at pilot stage has
proved to be very successful which is indicative of it’s adaptability to
industrial application.
HOW TO RECEIVE PROJECT
MATERIAL(S)
After
paying the appropriate amount (#5,000) into our bank Account below, send the
following information to
08068231953
or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK
ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR
MORE INFORMATION, CALL:
08068231953
or 08168759420
https://projectmaterialsng.blogspot.com.ng/
https://foreasyprojectmaterials.blogspot.com.ng/
https://mypostumes.blogspot.com.ng/
https://myeasymaterials.blogspot.com.ng/
https://eazyprojectsmaterial.blogspot.com.ng/
https://easzprojectmaterial.blogspot.com.ng/
Comments
Post a Comment