ATTENTION
BEFORE
YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPIC BELOW, PLEASE READ
THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU
CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000
ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE
BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953, 08168759420
WHATSAPP
US ON 08137701720
CONSTRUCTION OF METAL SHELF
ABSTRACT
In this construction of metal shelf, mild steel was chosen
due to its inherit duties.
The undismountable metal shelf, which has four compartments
and four partition was constructed under the following processes. This includes drawing and dimensioning of the
proposal metal. Metal shelf, market surveying and procurement of the needed
materials, marketing out and cutting of the materials, welding, smoothing and
filling of the work then finally the
painting. The dimensions are height …… width….. height of one apartment.
Actually, the purpose is to produce fabricated metal shelf
that will be economically cheap and at the same time, it will meet up to
standard in the market.
TABLE OF CONTENTS
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
2.1 LITERATURE
REVIEW
2.2 TYPES OF
SHELVES
2.3 THE DESIGN
OF SHELVES
CHAPTER THREE
CONSTRUCTIONAL PROCEDURE
CHAPTER FOUR
4.1
DISCUSSION
4.2
RECOMMENDATION
4.3
CONCLUSION
CHAPTER ONE
1.1 INTRODUCTION
A metal shelf is an invention with comportment and partition
where books, files and some chemicals are packed in laboratory, offices,
libraries and even homes have shelves. A shelf can be wooden, metal or glass. They
could also be dismountable and undismountable,
The one used in the
libraries and offices for packing books are called book shelf. In industries, are stored in shelves are
referred to as storage facility.
The material selected for the construction of any shelve
strongly depends on the material/properties and purpose the shelf will serve,
generally considering all the materials of construction, it can be seen that
for instance, both point to point comparison between them will definitely show
that in general, metals have a lot of advantages over non-metals. For example,
while many types of metal are suitable for high temperature operation, non
metals such as wood, glass are suitable for lower and limited range of
temperatures metal posses a whittler range of chemical stability then non-
metal.
1.2 OBJECTIVE/SCOPE OF THE PROJECT
The objective of the project is to construct a metal shelf
with the following dimensions.
Height = 6 feet
thickness of metal =1.5m (guage) =16
Width = 4 feet
metal type = mild steel
Breath =14 inches
The shelf is of 4 partitions constructed with metal which is
the best material for the construction of engineering device of this type and
in each partition distance the distance =1.5m which brings it to the total
18inches.
The metal which is used to contact the book shelf has good
qualities of corrosion resistance, mechanical strength, toughness and it is
very hard it is also very much available and has very good cost effectiveness.
Other properties including weld ability and formability provided the metal at
the best option in the selection of material for the construction of this
shelf.
HOW TO RECEIVE PROJECT
MATERIAL(S)
After
paying the appropriate amount (#5,000) into our bank Account below, send the
following information to
08068231953
or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK
ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR
MORE INFORMATION, CALL:
08068231953
or 08168759420
https://projectmaterialsng.blogspot.com.ng/
https://foreasyprojectmaterials.blogspot.com.ng/
https://mypostumes.blogspot.com.ng/
https://myeasymaterials.blogspot.com.ng/
https://eazyprojectsmaterial.blogspot.com.ng/
https://easzprojectmaterial.blogspot.com.ng/
Comments
Post a Comment